CB8R Side

Bolters

Joy CB-8R

  • Boom coverage for 3m (10ft) wide tunnel x 4.2m (14ft) high
  • Designed to tram in a 3.1m (10ft 3in) high tunnel
  • Hydrostatic drive
  • Electrical powered for tramming and drilling
  • Hydraulics featuring variable displacement piston pumps
  • TSRU rotary drifter (two-speed)  for industrial minerals

Contact an account manager for more information

The CB-8R hydraulic bolter drill, a single-boom hydraulic rig, is designed for drilling vertical and angled holes for bolting in underground production or development headings. The CB-8R features a side shift which allows the bolter to do a maximum drilling pattern of 1.2m (4ft).

The CB-8R includes the following features: 

  • Improved operator's stand and compartment
  • Improved guarding around operator
  • Larger opening to operator's compartment
  • Increased bolt rack capacity
  • New two-speed drill
  • Hydraulic centralizer for drilling extended holes
  • Expandable pins and bushing to reduce maintenance
  • Drill guard
  • Dust collector
  • Auto shutdown
  • Cable reel for 106m (350ft) of trailing cable

The CB-8R also includes robust drilling and carrier hydraulics that feature variable displacement piston pumps, specifically:

  • Jumbo hydraulics: for drill rotation, feed, and boom movements
  • General hydraulics: circuit design for optimal efficiency of steering and  brakes

TSRU (Two-Speed Rotation Unit)

 Technical Data    Wet  Dry
 Overall length  mm  400  415
 Weight  kg  68  70
 Rotation speed range  rpm  240-750  240-750
 Oil supply  Lt/min  40  40
 Normal drilling speed  rpm  550  550
 Normal bolt tightening speed  rpm  240  240
 Peak output torque (1) @ 22.5 MPa  Nm  537  537
 Output torque (dynamic) (1) @ 19.0 MPa  Nm  456  456
 Output torque (dynamic) (1) @ 14.0 MPa  Nm  337  337
 Starting torque (static) (1) @ 19.0 MPa  Nm  342  342
 Nominal water flow  Lt/min  25  --
 Water pressure range  kPa  700-1200  --
 Nominal air flow  Lt/sec  --  20
 Nominal vacuum  kPa V  --  55

TSRU Rotary drill

  • Robust bearings for high feed side loads
  • Compatible with existing feeds
  • Maximum overhaul intervals
  • Low surface speed for dynamic seals
  • Automatic switching between high speed and high torque
  • Non-handed design (one unit for all applications)
  • 20% increase in drilling speed
  • 25% increase in torque (above HDR40)
  • 33% less installed hydraulic power
  • Lowest maintenance costs
  • Reliability
  • Faster drilling speeds
  • Lowest tool consumption
  • Easiest to operate
  • Highest penetration rates
  • Lowest noise level

You may be interested in…